
Owner · Bona Certified Craftsman · NWFA Member
To choose a hardwood floor refinisher in Raleigh, ask for a written proposal that names the finish system and every room, check for Bona Certified Craftsman or NWFA training, compare the price per square foot (refinishing runs $5.50 to $8.00 here), and get the timeline, dust control method, and workmanship warranty in writing before you sign.
We have refinished floors in Raleigh since 2002, from century-old red oak in Five Points to wide-plank white oak in Wakefield. These are the questions we would want answered if it were our own floor, and how we answer them.
What should I ask a Raleigh floor refinisher before hiring?
- Will you put the whole job in writing? Rooms, square footage, the finish by name, the number of coats, and what is excluded.
- Who does the sanding? Ask whether the person who walks your floor is the person, or crew, who will sand it.
- What finish do you recommend for my house, and why? The answer should depend on your pets, kids, traffic patterns, and the look you want.
- Do you water pop before staining? On a stained floor, water-popped stain preparation opens the grain so the color is deeper and more even. Our water popping guide shows the difference.
- How do you handle dust? Listen for specifics about containment at the sanders.
- How many days, and when can furniture go back?
- Can my floor be sanded again? Engineered floors and floors that have been sanded many times have a limited wear layer. We check it before we quote a full sand.
- What does the warranty cover, and for how long?
Do certifications matter for floor refinishing?
They tell you the refinisher has been trained on the products and methods, which matters most with modern waterborne finishes and hardwax oils. Our owner, Izral Daniels, is a Bona Certified Craftsman, and we are members of the National Wood Flooring Association. Certification is not the whole story, so pair it with reviews and photos of finished floors. We have 57 verified reviews, and our project portfolio shows the before, during, and after of real Triangle jobs.
How much does refinishing cost in Raleigh?
We charge $5.50 to $8.00 per square foot to refinish existing hardwood, with a $1,500 project minimum. That is sanding to bare wood, a sealer, and two coats of finish (hardwax oil is one coat). A screen and recoat, for floors with a worn finish but no damage to the wood, runs $2.25 to $3.00 per square foot with a $750 minimum. Our Raleigh hardwood flooring cost guide breaks down installation, refinishing, and LVP side by side.
When you compare quotes, compare the same scope: sanding to bare wood, a sealer, the number of finish coats, and stain preparation. Each one changes the result and the price.
What should a written refinishing proposal include?
| Item | What to look for |
|---|---|
| Scope and square footage | Every room by name, measured, so you can see what is and is not included. |
| Sanding to bare wood | Whether the floor is sanded to bare wood or only screened and recoated. They are different jobs at different prices. |
| Stain preparation | On a stained floor, whether the wood is water popped before the stain so the color goes on deep and even. |
| Finish system by name | The product and how many coats, for example Bona Traffic HD or a hardwax oil such as Rubio Monocoat or Natura Onecoat. |
| Dust control | How dust is handled at the sanders, in plain words. |
| Schedule and cure time | How many days the sand and finish takes and when furniture and rugs can go back. |
| What is excluded | Furniture moving, shoe molding, painting, and repairs to anything found under the old finish, so nothing is a surprise. |
| Warranty | How long the workmanship warranty lasts, in writing. |
Which finish should a Raleigh refinisher recommend?
For most busy Raleigh homes we recommend one of two finish systems equally: a catalyzed hardwax oil such as Rubio Monocoat or Natura Onecoat, or Bona Traffic HD, a commercial-grade waterborne polyurethane. Hardwax oil gives a natural look and can be spot repaired. Traffic HD builds a hard protective film. Our Bona Traffic HD vs Rubio Monocoat guide compares them, and if you have dogs, read the best hardwood floor finish for dogs.
Is "dustless" refinishing really dust-free?
No. We sand with HEPA dust containment connected to the machines, which captures most of the dust where it is made. It is low-dust, not dust-free, and we say so up front.
Does my Raleigh neighborhood change the job?
It can. Homes in Five Points, Oakwood, and Hayes Barton often have original red or white oak that has been sanded before, so we check how much wood is left before recommending a full sand. Newer homes in Wakefield, Brier Creek, and Bedford at Falls River often have engineered hardwood over a slab, where the wear layer decides whether the floor can be sanded at all.

Our hardwood floor refinishing in Raleigh page goes neighborhood by neighborhood, and how long refinishing takes walks through the schedule day by day. If the floor has damaged boards, start with hardwood floor repair in Raleigh, and if you are closer to Johnston County, our guide to choosing a flooring company in Clayton covers installation as well.
Get a Raleigh Price
Send a few photos and rough measurements for a free preliminary estimate. We reply the same business day.
Start HereHiring Questions
How much does hardwood floor refinishing cost in Raleigh?
We charge $5.50 to $8.00 per square foot to refinish existing hardwood in Raleigh, with a $1,500 project minimum. That covers sanding to bare wood, a sealer, and two coats of finish (hardwax oil is one coat). Stain color, floor condition, and the finish system move the price within that range.
How long does it take to refinish hardwood floors in Raleigh?
The sand and finish usually takes 4 to 6 days. Waterborne polyurethane and hardwax oils both need cure time after the last coat before rugs and heavy furniture go back, and we give you the timing for your floor before we start.
Is dustless hardwood floor refinishing really dust-free?
No. It is low-dust, not dust-free. We sand with HEPA dust containment connected to the sanders, which captures most of the dust at the machine, but no sanding process removes every particle.
Should a refinisher come to my house before giving a price?
You can get a free preliminary estimate from photos and measurements. Some floors need an in-home assessment before a firm price: we charge $100 for that visit, confirmed before we come, and it may be credited toward your project deposit.
What warranty should a hardwood floor refinisher offer?
Ask for the workmanship warranty in writing. The industry standard is one year. Ours is five.
Do you refinish floors all over Raleigh?
Yes. We work from historic Five Points, Oakwood, and Hayes Barton to North Hills, Wakefield, Brier Creek, and Wake Crossroads, and across the rest of the Triangle from our Clayton showroom.
We refinish hardwood floors across Raleigh and the Triangle, from our Clayton showroom. We handle hardwood floor refinishing in Raleigh across the Triangle, including Raleigh, Cary, and Wake Forest. Request a free estimate: send a few photos and project details for a free preliminary estimate, and if your floor needs an on-site assessment, we explain it and any assessment fee before scheduling.

