Selma, NC and Johnston County
Hardwood Floor Recoating in Selma, NC
Hardwood floor recoating in Selma, NC. Screen and recoat with Bona Traffic HD restores worn or dull hardwood without sanding to bare wood. Most jobs completed in six hours, starting at $2.00 per square foot.
Screen and Recoat in Selma, NC
Hardwood Floor Recoating in Selma, NC
Selma homeowners get the same Bona Certified screen and recoat standard as the larger Triangle cities. Whether the floor is original oak in an older Selma home or newer hardwood in recent construction, a buff and coat with Bona Traffic HD restores the finish in a single day without the cost of full refinishing.
We serve Selma and all of Johnston County from our Clayton base, about 20 minutes away. Bona Certified Craftsman. 5.0 Google rating with 49 verified reviews. Free in-home assessment before any work is scheduled.
Fast turnaround.
Most screen and recoat jobs in Selma are completed within six hours. Light traffic within 24 hours, full use in 3 days.
Significant cost savings.
Recoating starts at $2.00 per square foot, a fraction of the cost of full refinishing. No sanding to bare wood means less time and less labor.
Bona Traffic HD finish.
We use Bona Traffic HD exclusively. The hardest water-based finish on the market, GREENGUARD certified, 3-day cure. Your floor will hold up far longer than a standard recoat product.
Even sheen, wall to wall.
A screen and recoat restores a uniform finish across the entire surface. Traffic lanes that have gone dull come back to match the rest of the floor.
Before You Book
Is Your Selma Floor Ready for a Screen and Recoat?
Good Candidates for Recoating
- ✓
Dull or lightly scratched finish
- ✓
Surface-level finish wear in traffic lanes
- ✓
Loss of sheen without exposed bare wood
- ✓
Floors with intact stain you want to keep
- ✓
No wax, polish, or oil products applied
May Need Full Refinishing Instead
- –
Deep scratches into bare wood
- –
Gray or black water stains in the wood
- –
Peeling or delaminating finish
- –
Wax, polish, or oil products on the surface
- –
Wanting a different stain color
If your floor needs more than a recoat, the next step ishardwood floor refinishing in Selma, NC. We tell you which service is right before you spend money on either.
Our Work
Screen and Recoat Results
Bona Traffic HD fresh off the applicator. Self-leveling, crystal clear, and cured to the hardest water-based finish available in 3 days. This is what every recoat job looks like when done right.
Serving Selma, NC and the Triangle
Based in Clayton. Bona Certified Craftsman. 5.0 Google rating, 49 verified reviews. Most jobs completed in six hours.
Reputation
What Our Customers Say
“12th and Oak create exceptional results with flooring. The flooring they installed in my condo is far superior to the flooring initially in place. The removal and clean up was done expertly and the new flooring installed with extreme care and quality. I whole-heartedly can recommend 12th and Oak for any flooring needs. They deliver on quality, timeliness, customer satisfaction, and integrity.”
P. C. Witt
“The team demonstrated exceptional professionalism, craftsmanship, and attention to detail. They seamlessly matched the new stairs to my existing hardwood floors. You cannot tell where one ends and the other begins.”
Tiffany Arthur
“Izral and his crew did an amazing job with the floors in our new to us house! We had our entire downstairs redone -- existing hardwood refinished, new hardwood put down, and everything stained to match. Izral was incredibly knowledgeable and easy to work with throughout the whole process.”
Olivia Vandeveer
Common Questions
Frequently Asked Questions
Hardwood floor recoating in Selma starts at $2.00 per square foot, consistent with our Triangle-wide pricing. Selma homes range from older properties with original hardwood to newer construction, and the recoating assessment is the same regardless of home age. Written estimates after a free in-home visit.
12th And Oak Floor Co. provides hardwood floor recoating, screen and recoat, and buff and coat services in Selma and throughout Johnston County. Based in Clayton, 20 minutes from Selma. Bona Certified Craftsman. 5.0 Google rating, 49 verified reviews. Call 984-400-4OAK or schedule online.
Yes. We serve Selma and all of Johnston County regularly. Our Clayton base puts us about 20 minutes from Selma, and we schedule recoating jobs throughout the county with the same pricing and service standard as our Triangle work. Call 984-400-4OAK or request a free estimate online.
A screen and recoat, also called a buff and coat or hardwood floor recoating, is the process of applying a fresh layer of finish over your existing floor without sanding down to bare wood. We lightly abrade the current finish using a buffer and screen pad to create adhesion, then apply one to two coats of Bona Traffic HD. It is the right service when the finish is worn but the wood is still in good condition.
Most screen and recoat jobs are completed within six hours. Your floors are ready for light foot traffic within 24 hours and back to full use within 3 days with Bona Traffic HD.
Refinishing sands the floor down to bare wood and allows a complete stain color change and full surface restoration. Recoating adds a new topcoat without sanding to bare wood. Recoating is faster and less expensive, but it cannot change the stain color or address damage that has penetrated the wood itself. We assess which option is right during the free in-home visit.
Yes. Engineered hardwood can be recoated using the same screen and recoat process as solid hardwood, as long as the existing finish is worn but intact and the surface is not damaged. Recoating is a preferred maintenance strategy for engineered floors because they have a thinner wear layer that should not be sanded repeatedly.
We use Bona Traffic HD exclusively for recoating. It is the hardest water-based finish on the market, GREENGUARD certified for indoor air quality, and cures in 3 days. Your refreshed floor will hold up to daily life far longer than a standard recoat product.
Where We Work
Serving the Triangle Since 2002
Based in Clayton, NC. We travel throughout Johnston, Wake, and Durham Counties. Call to confirm your specific location.
Johnston County
Home Base- Clayton
- Garner
- Smithfield
- Selma
- Four Oaks
- Benson
- Kenly
- Princeton
Wake County
- Raleigh
- Garner
- Cary
- Apex
- Fuquay-Varina
- Holly Springs
- Wake Forest
- Knightdale
- Wendell
- Zebulon
Durham County
- Durham
- Chapel Hill
- Hillsborough
Don't see your city? Call us. We consider jobs outside these areas on a case-by-case basis, particularly for larger projects.
984-400-4OAK
Ready to Get Started?
Schedule a FreeIn-Home Assessment
Serving Clayton, Garner, Raleigh, Cary, and communities throughout Johnston, Wake, and Durham Counties. We respond within one business day.
After you request an assessment, we review your project details, confirm your location, and schedule an in-home visit. You will receive a written proposal with the scope, products, timeline, and warranty clearly explained.
Want to see our work first? Browse the portfolio →